JL Audio E1200
May 17, 2022Proficient FDS-12
May 18, 2022
JL Audio E112-GLOSS
Call For Price
12-inch (300 mm) Powered Subwoofer, Black Gloss Finish
E-Sub drivers employ our exclusive DMA technology to optimize the drivers’ motor strength, ensuring linear behavior over a very long excursion range. Unlike typical steady-state modeling systems, DMA takes into account the dynamic shifts created by current flow and back EMF under real power conditions, with real program material. The payoff offered by DMA optimization is a driver that faithfully tracks its input signal, at all listening levels, leading to superior bass definition and dynamics.
General Specifications
Enclosure Type |
Sealed |
Enclosure Finish |
Black Gloss |
Frequency Response (Anechoic) |
22 – 118 Hz (±1.5dB)
-3 dB at 21 Hz / 120 Hz
-10 dB at 17 Hz / 153 Hz |
Effective Piston Area (Sd) |
84.4 sq in / 0.0545 sq m |
Effective Displacement |
235 cu in / 3.9 L |
Amplifier Power |
1500 W RMS short-term |
Power Mode(s) |
Off, On or Automatic (Signal-Sensing) |
Light Modes |
N/A |
Signal Processing
Unbalanced Inputs |
Stereo or Mono (two RCA jacks) |
Balanced Inputs |
N/A |
Speaker/High-Level Inputs |
Stereo or Mono (removeable plug) |
Input Grounding |
Isolated or Grounded |
Input Modes |
N/A |
Level Control |
Variable, from full mute to +15dB over reference gain |
Filter Mode(s) |
Low-Pass |
Filter Slope(s) |
24 dB/octave |
Filter Frequency Range |
25 Hz – 130 Hz |
Filter Defeat Function |
Yes |
Polarity |
0 or 180 degrees |
Phase |
Variable, 0- 280 degrees, referenced to 80 Hz |
Extreme Low Frequency (E.L.F.) Trim |
N/A |
Line Outputs |
Stereo or Mono (two RCA jacks), High-Pass or Pass-Through |
Output to Slave |
N/A |
Calibration Mode |
N/A |
Physical Specifications
Width (W) |
15.5 in / 394 mm |
Height (H) |
16.23 in / 412 mm |
Depth (D) |
18.39 in / 467 mm |
Net Weight |
73.5 lb / 33.3 kg |
Note: Height dimensions include feet. |