Pioneer DMH-2660NEX
April 25, 2024
April 26, 2024

Maestro SW Interface


iDatalink Maestro SW Steering Wheel Control Adapter


Steering Wheel Control Interface: The iDatalink Maestro SW Universal Steering Wheel Control Interface lets you retain your vehicle’s OEM steering wheel controls when replacing the factory radio with an SWC-compatible aftermarket radio. The Maestro SW lets you retain original steering wheel functions and assign a secondary press & hold feature to the buttons of your choice. The Maestro SW also lets you instantly create firmware for vehicles that are not included in the coverage list using a simple step-by-step web procedure.

Note: You’ll usually have to hardwire this adapter into your vehicle’s wiring. In most vehicles, the factory radio plug does not have a wire dedicated to the steering wheel audio controls, so splicing & soldering is often required.

Compatibility: The iDatalink Maestro SW is compatible with over 1400 vehicle models with analog steering wheel inputs from 2000 to date, and with most aftermarket radios (Alpine, Blaupunkt, Clarion, Dual, Eclipse, JVC, Kenwood, Pioneer, and Sony). The aftermarket head unit must have a SWC (Steering Wheel Control) 3.5mm input or wired remote connection.

  • Steering wheel control interface module
  • 24″ Seven-pin harness with bare wire on other end
  • 23″ Four-pin harness with a male 3.5mm connector/bare wire on other end
  • 7″ mini-USB (type-B) to USB (type-A) cable